INDOOR AND OUTDOOR MIST COOLING SYSTEM

 

Indoor and Outdoor mist cooling system use principle of evaporative cooling to reduce temperatures for Patios misting, Hotels, Restaurant, Pubs, party and wedding hall, sports fields and Private residences. When water flash evaporates into the air at high pressure, the air around is cooled and the humidity is slightly increased.

 

In Indoor and outdoor misting system, water is forced through custom high pressure or low pressure mist nozzles, the water is exploded into billions of small droplets each increasing the surface area of the water by a large percentage. Much the same as when you feel cold after swimming as the water evaporates from your skin, so does the air temperature around the droplet fall rapidly. The more water forced into the air increases the humidity until the evaporation rate slows and the air cannot accept more water. This is when wetting occurs from badly designed and controlled systems.  A correctly installed, quality mist system allows you to enjoy your garden and patio pleasantly even on the hottest day.

Reduce ambient temperature by 6-10° and provide immediate heat stress relief for passengers in crowded railway stations and subways through high pressure misting system installed at following places including

  • Railway Platform and Railway Terminals
  • Bus Stations, Bus Terminals
  • Homes
  • Patios
  • Outdoor and Indoor Area
  • Swimming Pool Side area
  • outdoor restaurants
  • amusement parks.

 

Air conditioning systems perform at their worst in hot summer days, just when they are needed the most. The cooling capacity decreases by 14-15% and the power draw increases by 31%. The problem occurs in condensers which has to change vapors refrigerant into liquid forcing the air through the unit and absorbing heat from the refrigerant causing it to condense. One of the best way to conserve electricity as well as water.

Applying water fogging system to air-cooled chillers can improve the efficiency under most of the working conditions, as the water mist could lower the air temperature entering the condenser.

 

Indoor mist cooling system:

On typical air-cooled chillers, a reduction in condenser air temperature of 6 °C will result 14% improvement in efficiency and 12°C about 25-30%. Indoor misting system is the best choice to be energy efficient cooling.

Benefits

  • Air temperature outside the unit lowered by up to 12 °C
  • Energy consumption decreased, as much as 24%
  • Increase the efficiency of HVAC units up to 24%
  • Live of the whole system extended
  • Low start up and operating costs
  • Quick installation
  • Energy Efficient

Outdoor misting system:

When temperatures rise into the 30°C and above, patio dining from indoors to outdoors, outside bar areas become very hot and cost of cooling becomes expensive. Our Outdoor misting system with a misting line or fans or in combination of both can turn that space into a comfortable environment.

Our Outdoor Mist cooling Systems are a simple, inexpensive and appealing way to lower temperature by 10-12 °C outdoors and indoors without wetting.

Evaporative cooling is responsible for the chillness you feel when a breeze strikes your skin. The air evaporates the water on your skin, with your body heat providing the energy.

Benefits

  • Lowers temperature
  • Reduces flying insects
  • Fully expandable
  • Absorbs dust and pollen
  • Special effects
  • Energy Efficient

Tags: Indoor and Outdoor Misting Systems – Manufacturers of Mist Cooling Systems with pump for garden, Misting Fan, Misting Ring, Misting Spray Nozzles, High Pressure Misting Systems

× How can I help you?