RESOURCES
Misting & Fogging System Videos
See TrueMist systems working at real sites — cooling, humidification, dust suppression and special effects.
- Site-led selection
- Installation support
- Spares & service
Adiabatic Pre Cooling Mist System
Saves Electricity Bill in AC Chillers
Reduce power consumption with minimal cost and prolong your AC Chillers
Location: Chennai
Tea Plantation Humidification
Fermentation Humidifier
Increases humidity and improves the tea production process
Location: Tinsukia, Assam
Dust Suppression System for Rollers
Dust Suppression on Roller Screens
Improves the standards around the material handling area
Location: Bhilai, Chhattisgarh
Dust Controllers at Stone Crusher
Best for Crusher Screens and Conveyors
Location: Kancheepuram near Chennai
Misting System for Restaurants
Misting Cooling System
Location: Hotel Green Meadows, OMR Road, Chennai
Outdoor Cooling at Tennis Court
Mist Cooling System for Sports Facility and Stadiums
Location: Mumbai
Mushroom Farms Humidification
Improves Humidity and Moisture in the Envrionement
Location: Chennai
Dry Fog System in Iron and Steel Plant
Controls Fugitive Dust
Location: Ballari, Karnataka
Mist Cooling System at Chandigarh Bird Park
Keeps Birds and Animals Cools
Location: Chandigarh
Restaurant Misting at Hotel Green Meadows, ECR Road
Restaurant Misting at Hotel Green Meadows, ECR Road
Location: Chennai
Adiabatic Mist Cooling System
Adiabatic Mist Cooling System [Reduces Power Consumption at AC Chiller Units]
This is a block of text. Double-click this text to edit it.
Industrial Misting System
Industrial Misting System
This is a block of text. Double-click this text to edit it.
Misting System for Temple
Public Places Cooling
Location: Kapaleeswarar Temple, Mylapore, Chennai
Misting for Super Market and Vegetable Store
Misting for Super Market and Vegetable Store
Location: Gurgaon, Haryana
- 01
Understand
We review your application, site conditions, water, power and what you want to achieve.
- 02
Configure
We select the pump, nozzles, lines, filtration and controls, and share a clear scope.
- 03
Implement
Our team installs, tests and commissions the system and shows your staff how to run it.
- 04
Support
Spares, servicing and maintenance plans keep the system working season after season.
BEFORE YOU ENQUIRE
Questions about Misting & Fogging System Videos
Have a different question?
Ask our team on WhatsAppHow much can a mist cooling system lower the temperature?
It depends mainly on humidity and air movement. In hot, dry weather a well-designed high-pressure system can bring the air temperature down noticeably; in humid coastal weather the effect is smaller. We assess your site conditions before recommending a system and give you a realistic expectation.
Will the mist make people or surfaces wet?
A correctly sized high-pressure system produces droplets fine enough to evaporate before they settle. Wetting usually comes from the wrong nozzle, low pressure, poor drainage of lines or too little air movement — all of which we address in the design.
What water quality do I need?
Clean, filtered water is essential. For high-pressure and fog systems we normally recommend RO water to avoid nozzle clogging and white deposits. We include filtration in every system and advise on RO where needed.
How much maintenance does a misting system need?
Routine checks of filters and nozzles, periodic pump oil changes and draining lines when not in use. We can set up a maintenance schedule or an annual service plan.
LET’S DISCUSS YOUR REQUIREMENT
Your site.
Your challenge.
Let’s talk.
Planning a new system, upgrading an existing one or looking for a component? Share the basics and our team will get back to you.
Helpful to share
- Area to be cooled (length × width) and whether it is open, semi-open or enclosed
- Roof height and where lines can be mounted
- Water source and quality (RO, borewell or municipal)
- Power supply available near the pump location
- Hours of use per day and photos of the site
PREFER A CONVERSATION?
+91 93535 77088 WhatsApp your requirementMon–Fri 10 am–5 pm · Sat 10 am–3 pm
Tell us what you need.
Fields marked * are required.