Misting System

A Medium Pressure misting system uses a motorized pump to raise the pressure to 20 to 35 bar. The pump, motor, tubes, fittings and nozzles are all rated to work within this range. The spray is fine enough to cool you in a hot and dry weather, it is less likely to get you wet and can also provide more cooling than a Low-pressure system. A simple solution to prevent wetting and to keep humidity levels down, a recycle timers can be incorporated, this timer makes the pump run for example, 2 minutes and then shuts off for 3 minutes and then starts up again in cyclic mode.

A High-Pressure system will give the maximum cooling compared to any misting system available as it works with pressure above 35 bar, even in areas with high humidity, without getting anything wet. Our systems are designed to produce very fine mist which will give you enough cooling to make it feel like a regular winter’s day. High grade Nylon High Pressure tubes with SS connectors and Nozzle make up part of this system, which provide the best output as well as long life in terms of usage. Misting systems over 35 bar are known as a high pressure misting systems and its maximum efficiency can be achieved around 55 – 80 bar (800 – 1200 psi). As with all mist systems, each and every component must be rated to work within the same range of water pressure.

Medium and High-Pressure systems use pumps to increase the water pressure from any water or gravity-fed source that already has some water pressure, or a ground source such as a pond or tank with still water that has no pressure. They can be used in all places that require good, natural – like cooling. Example: Venues, Auditoriums, Indoor and outdoor cooling, Sports arenas, Outdoor work areas etc.