MIST COOLING
Cooling Solutions for Printing & Lamination Units
Lower heat and steady humidity to help with static and paper curl in print and lamination units.
- Site-led selection
- Installation support
- Spares & service
TrueMist™ offers advanced high-pressure mist cooling systems tailored for printing and lamination environments. Our systems control ambient temperature and humidity, eliminating production issues caused by heat and dryness.
02 / OVERVIEW
Key Problems Solved
- Paper deformation and curling
- Ink smudging, drying inconsistency
- Laminate delamination and adhesive failure
- Machine overheating and paper feed issues
03 / FEATURES
System Features
- Pressure Range: 50–70 bar (high-pressure)
- Nozzle Type: SS-316 / Brass | Droplet size <10 microns
- Control Options: Manual / PLC / Sensor-driven automation
- Filtration: Multi-stage (sediment + micron + antiscalant)
- Design: Modular & scalable, fits all machine layouts
04 / APPLICATIONS
Typical Applications
Offset and Flexo Printing Lines
Lamination Machines (BOPP, PET, PVC, Etc.)
Uv/ir Drying Tunnels
Flexible Packaging & Film Processing Areas
Paper and Film Storage Zones
05 / BENEFITS
Performance Benefits
- Maintains optimal humidity for consistent ink bonding
- Prevents substrate shrinkage and print defects
- Improves laminate adhesion consistency
- Reduces machine wear due to overheating
- Enhances operator comfort in hot shop floors
- Decreases downtime and material wastage
06 / WHY TRUEMIST
Why TrueMist?
- 01
Understand
We review your application, site conditions, water, power and what you want to achieve.
- 02
Configure
We select the pump, nozzles, lines, filtration and controls, and share a clear scope.
- 03
Implement
Our team installs, tests and commissions the system and shows your staff how to run it.
- 04
Support
Spares, servicing and maintenance plans keep the system working season after season.
BEFORE YOU ENQUIRE
Questions about Cooling Solutions for Printing & Lamination Units
Have a different question?
Ask our team on WhatsAppHow much can a mist cooling system lower the temperature?
It depends mainly on humidity and air movement. In hot, dry weather a well-designed high-pressure system can bring the air temperature down noticeably; in humid coastal weather the effect is smaller. We assess your site conditions before recommending a system and give you a realistic expectation.
Will the mist make people or surfaces wet?
A correctly sized high-pressure system produces droplets fine enough to evaporate before they settle. Wetting usually comes from the wrong nozzle, low pressure, poor drainage of lines or too little air movement — all of which we address in the design.
What water quality do I need?
Clean, filtered water is essential. For high-pressure and fog systems we normally recommend RO water to avoid nozzle clogging and white deposits. We include filtration in every system and advise on RO where needed.
How much maintenance does a misting system need?
Routine checks of filters and nozzles, periodic pump oil changes and draining lines when not in use. We can set up a maintenance schedule or an annual service plan.
LET’S DISCUSS YOUR REQUIREMENT
Your site.
Your challenge.
Let’s talk.
Planning a new system, upgrading an existing one or looking for a component? Share the basics and our team will get back to you.
Helpful to share
- Area to be cooled (length × width) and whether it is open, semi-open or enclosed
- Roof height and where lines can be mounted
- Water source and quality (RO, borewell or municipal)
- Power supply available near the pump location
- Hours of use per day and photos of the site
PREFER A CONVERSATION?
+91 93535 77088 WhatsApp your requirementMon–Fri 10 am–5 pm · Sat 10 am–3 pm
Tell us what you need.
Fields marked * are required.