Skip to content
Application-led misting systems. Integrated support.
TrueMistMISTING & FOGGING SYSTEMS

MIST COOLING SYSTEM

Mist cooling system for cricut turf

Cricket turfs, especially synthetic or natural grass surfaces in hot and dry climates, can heat up significantly, affecting pitch condition, player comfort, and safety. A mist cooling system provides a practical, eco-friendly solution to cool the turf and ambient air using evaporative cooling.

Why Mist Cooling for Cricket Turfs?

Benefit Impact
Surface temperature reduction Cools turf by 8–15°C, especially synthetic pitches
Improves player comfort Reduces heat stress and fatigue during long play hours
Protects turf condition Prevents cracking, drying, or melting of artificial turf
Eco-friendly Minimal water use, no runoff, no chemical use
Non-intrusive Fine mist evaporates instantly – no water puddling

How It Works: Mist Cooling Principle

High-pressure pumps push water through ultra-fine misting nozzles at 700–1000 psi. The mist (5–15 microns) instantly evaporates in hot air — pulling heat from the air and turf, reducing surface temperature.

Mist systems can be:

  • Fixed: Installed around turf boundaries
  • Mobile: Used before/during play
  • Pop-up: Turf-integrated for premium setups

Core System Components Explained

Component Details
Pump 3–5 HP stainless steel pump (700–1000 psi)
Nozzles Anti-drip brass/SS, 0.2–0.3 mm orifice
Tubing High-pressure nylon or SS
Filter 5-micron + RO/soft water preferred
Controller Manual, timer, or temperature-triggered automation

Layout Options Based on Ground Type

A. Perimeter Misting Poles

  • Installed every 5–7 meters
  • Mounted 2.5–3 meters above ground
  • Best for permanent stadiums or cricket academies

B. Mobile Misting Rigs

  • Fog cannons or trolley-mounted units
  • Ideal for shared fields or seasonal tournaments

C. Pop-up Misting Fixtures (Advanced)

  • Turf-integrated; aesthetic and hidden
  • Best for elite clubs or commercial installations

Estimated Water & Power Consumption

Turf Size Approx. Nozzles Water Use (L/hr) Power (HP)
Practice Pitch (25m x 3m) 6–8 50–80 1–2 HP
Half Ground (50m x 40m) 15–20 150–250 3 HP
Full Ground (75m x 55m) 25–40 300–500 5 HP

Automation Options

  • Timer-based misting (run every 30 min or pre-game)
  • Temperature-controlled systems (activates above set temperature)
  • Remote/manual switch via control panel or app

Pro Installation Tips

  • Use anti-drip nozzles to avoid water pooling
  • Prefer RO or soft water to prevent nozzle scaling
  • Install wind sensors to manage mist spread on breezy days
  • Clean filters monthly for optimal performance

Frequently Asked Questions (FAQ)

Q1: Will mist cooling affect the cricket ball’s bounce or spin?

A: No. The fine mist evaporates before hitting the surface — no water residue is left on the pitch.

Q2: Can this system work in humid areas?

A: Yes, though cooling efficiency reduces slightly in high humidity. Air movement and timing help offset this.

Q3: Is misting better than sprinkler cooling?

A: Yes. Mist cooling is non-intrusive, uses less water, and avoids waterlogging issues.

Want a Custom Design?

Please share:

  • Turf size (Length × Width in meters)
  • Turf type (Natural or Artificial)
  • City/location
  • Power & water availability
  • Permanent or mobile setup preference

I’ll provide:

  • Nozzle & pump specs
  • Spray layout
  • Water & power use
  • Optional automation plans

Not sure which system fits your site?

Share your application and location — our team will help with the selection.