COMPONENTS
High-Pressure Mist & Fog Nozzles
The nozzle decides droplet size and coverage. Choose from brass and stainless-steel mist and fog nozzles with anti-drip options.
- Site-led selection
- Installation support
- Spares & service
01 / OVERVIEW
Mist Nozzle and Fog Nozzle Manufacturers in India
TrueMist is a manufacturer and supplier of mist nozzles in India. We offer a wide variety of mist nozzles designed, manufactured, tested, and deployed based on application requirements. Our mist nozzles can be customized for connection size, flow rate, and material. Options include brass and stainless-steel bodies with SS or ceramic orifice—selected as per site conditions and performance targets.
Types of Mist Nozzle
High Pressure Mist Nozzle
- High Pressure Mist Nozzles – 0.2 mm with 10/24” threaded connection
- Orifice size: 0.2 mm
- Thread: 10/24”
- Expected droplet size: 30 to 50 microns
These are ideal when you need a finer, more airborne mist effect for efficient cooling and controlled performance.
Low Pressure Mist Nozzles
For applications where a simpler setup and lower operating pressure is preferred, TrueMist also offers low-pressure mist nozzle options.
- Low Pressure Nozzle Connection Sizes (available options): 1/8, 1/4, 3/8, 1/2” (Custom connections can be supported based on requirement.)
- Orifice selection (low pressure):
Orifice size is selected based on operating pressure and required droplet size/output.
- Expected droplet size: 50 to 100 microns (depending on nozzle/orifice and pressure)
Low pressure setups are commonly chosen where practical cooling/humidity addition is needed and installation simplicity is a priority.
02 / SELECTION GUIDE
How to Choose the Right Mist Nozzle for Cooling
Choosing the right misting nozzle size is essential for achieving effective cooling, dust control, or humidification based on your application and environment.
- Decide the required droplet range
- 1.High pressure (30–50 microns): finer, more airborne mist; strong evaporation-first cooling
- 2.Low pressure (50–100 microns): practical mist output; more sensitive to placement and cycle timing
- Match nozzle to your pressure capability
- 1.Higher pressure generally produces finer droplets (more “fog-like” effect)
- 2.Lower pressure typically produces larger droplets (requires conservative layout control)
- Select based on Application
- 1.Greenhouses & agriculture: fine mist selection to avoid over-wetting crops
- 2.Outdoor cooling: select output based on climate (dry vs humid) and airflow
- 3.Industrial cooling / odor control / dust: choose flow/output based on coverage and process requirement
- Test & Adjust
- Start with one size and observe performance. You can fine-tune by switching to a larger or smaller orifice nozzle, or adjusting pump pressure.
03 / SERVICE
Mist Cooling Nozzle Maintenance & Cleaning
- Clogged nozzles caused by calcium buildup can be cleaned by soaking them in our nozzle cleaner. Let them soak for 30 minutes to one hour, rinse them thoroughly, and re-install them into the system. Our mister nozzles are designed to be easily disassembled for cleaning and flushing out debris.
- To reduce the risk of future clogging, we recommend adding a scaling filter to your misting pump.
04 / APPLICATIONS
Applications of Mist & Fogging Nozzles
Our mist nozzles and fogging nozzles are used in a wide range of industries for cooling, humidification, dust suppression, and sanitation. Applications include:
- Industrial Cooling
• Temperature reduction in factories, warehouses, and workshops
• Effective for metal processing, textiles, and plastic molding units - Agriculture & Greenhouses
• Maintain optimal humidity levels
• Prevent plant wilting and heat stress
• Even moisture distribution without overwatering - Dust Suppression
• Used in construction sites, mining, and cement plants
• Helps control airborne particles and improve air quality - Outdoor Cooling
• For patios, outdoor dining, events, and theme parks
• Creates a comfortable environment in hot and dry climates - Disinfection & Sanitization
• Used in fogging tunnels, livestock farms, and public spaces
• Delivers fine disinfectant mist to cover surfaces evenly - Animal Cooling
• Dairy farms, poultry sheds, and stables
• Helps reduce heat stress and improve productivity
05 / BENEFITS
Benefits of Mist Nozzles
Fast cooling through evaporation: Fine droplets evaporate quickly, reducing air temperature without soaking surfaces.
Better comfort in outdoor and industrial areas: Creates a noticeable cooling effect in hotspots like walkways, work zones, patios, and queues.
Supports humidity control: Helps maintain moisture levels in greenhouses, polyhouses, and process areas where dry air is a problem.
Reduces dust and airborne particles: Captures fine dust in construction, mining, warehouses, and material handling zones.
Improves air quality and working conditions: Lowers heat stress and helps create a more breathable environment in high-temperature areas.
More uniform coverage with the right nozzle/orifice: Consistent spray pattern helps avoid uneven misting and localized wet patches.
Flexible for different setups: Works in both high-pressure (finer droplets) and low-pressure (practical output) systems depending on need.
Lower water wastage when controlled: When used with proper spacing and duty cycles, it delivers effective cooling with efficient water use.
Long service life with proper filtration: Good filtration and cleanable designs reduce clogging and keep performance stable over time.
06 / WHY TRUEMIST
Why Choose TrueMist for Misting Nozzle
- Precision Engineering Our nozzles are made from high-quality brass, stainless steel, or ceramic, designed to withstand high pressure and deliver consistent misting performance.
- Trusted Industry Experience Backed by years of domain knowledge, we’ve supplied misting solutions to farms, factories, event spaces, greenhouses, and commercial sites across India.
- Complete Misting Solutions – Not Just Nozzles We are not only a mist and fog nozzle manufacturer — we provide complete misting systems in India, including pumps, filters, fittings, and installation guidance. Whether you need a standalone fogging nozzle or a full-scale misting setup, we deliver end-to-end solutions.
- Easy Maintenance Our misting nozzles are user-friendly, designed for easy cleaning, with options to prevent calcium buildup and clogging — ensuring system longevity and optimal output.
- Pan-India Delivery & Support From design consultation to after-sales support, our team ensures timely service and nationwide delivery — whether you need one water mist nozzle or a fully installed misting system.
- Tailored to Your Application From nozzle size, flow rate, to material selection — we customize each component based on your specific needs in agriculture, industrial cooling, outdoor climate control, or dust suppression.
- 01
Understand
We review your application, site conditions, water, power and what you want to achieve.
- 02
Configure
We select the pump, nozzles, lines, filtration and controls, and share a clear scope.
- 03
Implement
Our team installs, tests and commissions the system and shows your staff how to run it.
- 04
Support
Spares, servicing and maintenance plans keep the system working season after season.
BEFORE YOU ENQUIRE
Questions about High-Pressure Mist & Fog Nozzles
Have a different question?
Ask our team on WhatsAppWhat is the difference between a mist nozzle and a fog nozzle?
Both terms are often used interchangeably, but generally:
- Mist nozzles produce larger droplets (~30–100 microns) and are ideal for cooling.
- Fog nozzles create ultra-fine droplets (<30 microns), used for humidification and dust control.
What size misting nozzle should I use?
It depends on the application and climate:
• 0.1–0.15 mm for humid areas and indoor fogging
• 0.2 mm for outdoor cooling in dry areas
• 0.3 mm+ for high-flow, industrial use cases
Can I use tap water with mist nozzles?
Yes, but we highly recommend using a filtration system to prevent clogging due to mineral build-up. For hard water areas, a scaling filter is essential.
How do I clean a clogged misting nozzle?
Soak the nozzle in a descaling solution or nozzle cleaner for 30–60 minutes
- Rinse with clean water
- Reinstall after drying
Our nozzles are designed for easy disassembly and cleaning.
Do you provide full misting systems or only nozzles?
We offer complete misting systems in India, including pumps, filters, tubing, and fittings — not just the nozzles.
What is the thread size of your mist nozzles?
Our standard is 10/24, but we also offer 12/24 and custom threads on request.
How do I choose the right part?
Share your pump model, system pressure or nozzle thread size and we will confirm the correct part before you order.
Do you deliver across India?
Yes, we dispatch across India. Delivery time depends on the item and location.
LET’S DISCUSS YOUR REQUIREMENT
Your site.
Your challenge.
Let’s talk.
Planning a new system, upgrading an existing one or looking for a component? Share the basics and our team will get back to you.
Helpful to share
- Item and quantity you need
- Your pump model or nozzle thread size, if replacing
- System pressure (low, mid or high)
- Delivery location (city and PIN code)
- Photos of the existing part, if available
PREFER A CONVERSATION?
+91 93535 77088 WhatsApp your requirementMon–Fri 10 am–5 pm · Sat 10 am–3 pm
Tell us what you need.
Fields marked * are required.